• With this jaw you can clamp parallel premachined workpieces with
  a length of min. 0 -  max. 69 mm. / ATTENTION: on the TeleCentric 70M the Clamping range adapter
  is required to clamp to 0.
  The dowel pins serve as bearing surface and can be set at a height of 176mm and 191mm.
• Minimum clamping edge loss: 20 mm at height 176 mm /
                                                       5 mm at height 191 mm
• Material: hardened steel
• Case-hardened and tempered 720 + 50 HV10; hardening depth = 0,7 + 0,3
• Inclusive 4 dowel pins 4x10 DIN EN ISO 8734

 1 x Zero jaw b70
 4 x Cylinder pins DIN 6325